The Proper Way to Jack Up a Car: Learning Car Jack Placement and Instructions

car jack points

How to Jack Up a Car:

Sometimes there is a repair or inspection that needs to be done to your vehicle and you either can’t go to the mechanic or would rather do it yourself and save money. Situations arise where you need to change a flat tire or inspect the brakes of your vehicle, and in these situations, it is necessary to know how to lift a car with a jack safely and effectively. If you need to jack up a car in order to do some necessary maintenance or repair, there are some things that you should know and carjack instructions you should follow so that you can learn how to use a car jack safely and properly.

How to Properly Jack Up a Car:

car jacked up

The proper way to jack up a car is the safest way to jack up car. Safety is most important when lifting an extremely heavy vehicle, and you also want to make sure you’re doing the job correctly so that you are safe when you drive your vehicle after its repair or inspection. Before we get to the step by step tutorial, here are some car jack points for safety:

  • Park your car on level ground before you jack your car up. This will prevent tire damage and prevent the off chance that your car will roll in any direction before you can get the safety mechanisms in place.
  • Always make sure that where you have parked the car to do your repair or inspection is a safe place that is out of the way of any other vehicles. The highway is the most unsafe place to jack up a car or change a tire. If your tire goes flat on the highway, you will either need to assess whether you can drive it to the nearest rest stop or get the car towed to a safer location.
  • Put the car in Park and pull your E-brake or parking brake to make sure that the car will not roll. You want to do as much as possible to make sure that the car is safe and will not move or roll away.
  • Use the car jack to lift the car only, never go underneath the car with just the car jack in place. Use car jack stands to keep the car jacked up. Without the car jack stands, you can be crushed to death under the weight of your vehicle if the carjacking tool moves slightly.
  • Put something behind and in the front of any wheels that are still on the ground to make sure that the car does not move. Heavy objects like bricks or tools specifically used to keep tires in place will prevent the car from potentially rolling and threatening your safety. This part is extremely important so do not skip this step!

Where to Place a Car Jack:

car jack placement

Carjack placement is important, so be very aware of using the proper placement when jacking up your car. You will want to put the jack onto the part of the vehicle that you wish to raise. Check out your particular car’s owner’s manual to find out the proper place to put your car jack in order to prevent damaging the vehicle. Different vehicles have different unique placements for carjacks. Place jack stands near the car jack if you are using them.

Jacking Up the Vehicle:

Once the car jack is placed, It is time to jack up the car. You can have either a scissor car jack or a hydraulic car jack. The scissor jack requires you to crank the wrench or rod after you insert it over the knob of the jack. The hydraulic jack simply requires you to pump the handle to jack up the car. depending on your style of car jack either pump or crank the jack in an even and steady manner until you get the car jacked up to your needed height.

Once you’ve jacked up the vehicle, place your jack stands near the jack at the height you need. This means that the car should be jacked up to a slightly higher level than the height of the jack stands. Once you have positioned the jack stands under the raised car, lower the car with the jack so that the car is supported on the jack stands. Then make sure that the stands are secure. Never use anything other than jack stands to prop up a lifted car. If you use something unstable it could slip and fall at any moment, which could cause serious injury or death. When you’ve positioned the jack stands take a moment to test and make sure that the car is stable and properly lifted onto the jack stands. If you give it a little bit of a push and it wobbles, you know you need to restart the process to ensure the safety of yourself and those around you.

Once you are finished with what you need to do and you want to lower your car. Jack up the car again with the car jack to slightly higher than the jack stands level. Then remove the jack stands and lower the car back down to the ground using the jack. With a scissor jack, simply turn the wrench or rod in the opposite direction to lower. For the hydraulic car jack, use the pressure release valve to lower the car down.

Now you have completed the process of jacking up your car, using jack stands, changing a tire or checking your brakes, removing the stands, and then lowering your vehicle safely back onto the ground, you have properly and safely accomplished your goal. Remember the importance of using the right tools and equipment to do this repair or inspection, and to make sure that you are doing it in a safe and level area.

Do you like this article?
no 0
See all

This site uses cookies to ensure you get the best experience on our website.